Proxmox Homelab - Network

By Jason Unger in All Blogs on

This will be more of an overview of how to set up the network, since this can vary so much depending on what network equipment you are running. In my case I'm running a Brocade ICX 6610 switch and an OPNsense firewall. There are a total of 4…

Proxmox Homelab - Host Installation and Setup

By Jason Unger in Proxmox on

Proxmox Install First we will want to install the Proxmox host. I'm going to assume you have already done this, but you'll want to download Proxmox and put it on a flash drive using Rufus. To start, we want to only have the NIC plugged in…